Description
AB464A HP Integrity Rx6600 2x Intel Itanium Dual-Core 29150n/1.6GHz 24MB L3 Cache 0GB RAM PCI-X Back Plane 2x Gigabit Ethernet 7u Rack Server.
General information :
Manufacturer : hewlett packard
Manufacturer part number : ab464a
Manufacturer website address : www.hp.com
Product name : integrity rx6600 7u rack server
Processor chipset :
Processor type : intel itanium 29150n / 1.6 ghz
Number of cores : dual-core
64-bit computing : yes
Installed qty : 2
Max supported qty : 4
Cache memory :
Cache memory type : l3 cache
Installed size : 24 mb
Cache per processor : 24 mb
Memory :
Installed ram size : 0 gb
Maximum ram size : 384 gb
Memory slots : 124 dimm slot memory carrier board
Technology : ddr2 sdram – ecc
Memory speed : 533 mhz
Memory specification compliance : pc2-4300
Form factor : dimm 240-pin
Storage storage controller :
Hard drive : none
Optical drives : none
Internal disks : hot plug
Storage controller (1st) type : 1 x raid – integrated
Controller interface type : serial attached scsi
Channel qty : 8
Raid level : raid 1
Storage controller (2nd) type : 1 x ide – integrated
Network communication :
Networking : network adapter – integrated
Ethernet ports : 2 x gigabit ethernet
Data link protocol : ethernet, fast ethernet, gigabit ethernet
Remote management and ha monitoring : integrated ilo2 management processor
Telnet and web console : via 10/100base tx management lan (rj 45 connector)
Tx lan : core pci-x dual port 10/100/1000base tx lan (with auto speed sensing rj 45 connector, wake on lan support)
I/o backplane :
1x i/o backplane
Either pci-x 2.0 backplane with 8 available slots
Or pci-express backplane with 8 available slots
Expansions connectivity :
Expansion bays total (free) :
16 (total) / 16 (free) x hot-swap – 2.5in
1 (total) / 1 (free) x front accessible – 5.25in x 1/2h
Expansion slots total (free) :
4 (total) / 2 (free) x processor
24 (total) / 24 (free) x memory board
2 (total) / 2 (free) x pci-x hot-plug 266 mhz
2 (total) / 2 (free) x pci-x hot-plug 133 mhz
4 (total) / 4 (free) x pci-x hot-plug 66 mhz
Interfaces ports :
2 x network – ethernet 10base-t/100base-tx/1000base-t – rj-45
1 x management – ethernet 10base-t/100base-tx – rj-45
2 x serial – rs-232 – 9 pin d-sub (db-9)
3 x hi-speed usb – 4 pin usb type a ( 1 in front )
Power device :
Device type : power supply – hot-plug
Power redundancy : optional
Power redundancy scheme : n 1 (with optional power supply)
Installed qty : 1
Max supported qty : 2
Voltage required : ac 120/230 v ( 50/60 hz )